Step by step house construction process

here are some construction points=> step1 Before building a house, you first need an architect who can give you the drawing according to your requirement.After that your architect will make the same design in 2D and 3D for you so that it will be easier for the contractor to work. step2=>Now you have the drawing in hand, so you can point the contractor accordingly. By showing your requirement and drawing to the contractors, you can get them to write everything for how much money he will going to charge you. step3=> These two things are very important while building a house. One is a good architect and the other is a good contractor.After this is final, you have to decide in advance what material you want to install in your house, such as cement bars.You have to prepare for all these things in advance.Then your construction work will start.Construction is done in two or three ways first normal construction second column base construction. step 4=>These days everyone is preferring column base structure.So let us start with that. First of all, you will have to dig a pit according to the column, whose depth should not be at least 4 feets.After that, you will have to make a base of at least m25 mix for the base of the column.After the base of the column is complete, you have to make a net of at least 4 by 4 in 10 mm steelbars under the column. Then after that the column have to stand on top of it. After erecting all the ones by applying perma you have to fill them with m20 mix.You have to fill all the columns according to the height given by the architect.After that you have to prepare for shuttering in which Bhims should be cast first. after casting of beams with M20 material you have to cost your you have to cost your roof before casting your roof you need a plumber and electrician also so they can put some pipes in your roof before casting.